The Bathtub Reglazing Process
Here Is How the Magic Happens
Here Is How the Magic Happens
1.Removing the Old Paint
Our expert removes all the old paint from the surface of your tub, making sure the surface is smooth. All the paint chips are also removed before we start the reglazing process.
2. Cleaning The Surface
The surface of the bathtub is cleaned thoroughly to make sure the glaze bonds properly with the surface.
3.Removing the Dirt
If our expert considers it to be necessary, he will sand down the surface to remove any dirt, dust and excess paint.
4. Cleaning the Surface Again
The surface is cleaned again to remove all the sand, dirt and dust that have resulted from the sanding process.
5.Repairing the Tub
All the chips, no matter how small, are repaired. Also, our expert professionally removes any signs of rust.
6. Wiping the Surface
The surface of the tub is wiped clean with professional solutions, so we can start applying the two coats of primer.
Generally, the tub reglazing process takes between 2 and 4 hours, depending on the size of the tub and the extent of the damage.
The glazing must be left to cure for 24 hours. We recommend homeowners and business owners to avoid touching, using or cleaning the tub during this time.
We know you want to see with your own eyes the results of a reglazing or refinishing process. Just take a look at these before and after pictures. These are all projects completed by our experts. As you can see with your own eyes, our reglazing services are the best in Houston, Texas!
